Get in Touch with Guanma
★★★★★
Guanma removable adhesive material solutions
Removable Labels
Removable Labels and Clean-Peel Label Stock for Custom Applications
Removable labels from Guanma are B2B label stock: PET film, BOPP synthetic paper, or coated paper facestock combined with removable adhesive and glassine or CCK release liner for converting lines.
- Built for converters and packaging teams
- Custom facestock, adhesive, and liner combinations.
- Regional supply support from Thailand and Vietnam.
- Sample testing before mass production.
B2B Verified
Clean-Peel Tech
Custom Specs
Ask for Adhesive Recommendation
Removable label application on consumer packaging
3
Facestock families
60-140g/m²
Liner range
1530mm
Max standard width
-10°C to +60°C
Adhesive-dependent range
Clean-Peel Labels That Stay Put Until Removal
A removable adhesive label works when these three factors are in equilibrium: initial tack to accept handling, controlled peel to enable removal and surface protection with removal.
01
Initial tack
The adhesive must grab fast enough for packing, filling, retail handling, or temporary identification.
02
Clean peel target
The removal behavior must be tested after the expected dwell time on the real substrate.
03
Surface safety
Glass, coated paperboard, PP, PE, PET, and metal surfaces all change the adhesive choice.
Application engineer note
Clean removal is a performance target, not a guarantee. Two labels that remove cleanly from glass may behave differently on low-energy PP, textured plastic, or coated carton after exposure to heat, moisture, or prolonged dwell time.
Guanma Removable Label Stock Constructions
Guanma produces removable label stock from facestock, adhesive, and liner combinations, rather than cornering buyers into prematched stock items. Your team can fine-tune print surface, peel action, liner unwind, custom slitting, and roll width around the final package.
Construction
Best-fit removable label use
Guanma specification base
Buyer note
Coated paper + removable adhesive
Retail promotions, temporary packaging, price labels, dry indoor goods
80 / 105 / 128 / 157 / 200 / 250 g paper; flexo, offset, UV
Choose when print finish and paper-grade cost matter more than moisture exposure.
BOPP synthetic paper + removable adhesive
Wet wipe lids, refill containers, personal care packaging, moisture-exposed labels
54 / 75 / 100 um; UV, flexo, screen, TTR, digital inkjet
Use where tear resistance, moisture exposure, and curved-surface fit matter.
PET film + removable adhesive
Durable temporary marking, premium containers, higher-stability label stock
25 / 36 / 50 um; transparent, white, matte silver, glossy silver, aluminized
Use where dimensional stability, chemical exposure, or premium film finish matters.
Match the Adhesive to the Surface
pressure-sensitive adhesive behavior is dependent on surface wet-out, tack, peel strength, shear resistance, dwell time and exposure to environment. For this reason it is required that the permanent / removable label material should be tested on the actual pack surface ahead of a production run.
Send your surface, dwell time, and removal target.
Ask for substrate compatibility advice
Surface or package
Recommended starting point
Risk to test
Sample test focus
Glass jars and bottles
Coated paper or clear film with removable adhesive
Condensation and long dwell time
Removal after cold storage and room-temperature recovery
PP / PE wet wipe lids
BOPP synthetic paper with tuned removable adhesive
Low surface energy and repeated handling
Edge lift, clean peel, and reseal feel
PET containers
PET or BOPP facestock with removable adhesive
Label stiffness on curved surfaces
Flagging after 24-hour and 72-hour dwell
Coated cartons
Coated paper with removable adhesive
Fiber tear or coating damage
Peel angle and label size vs carton coating
“
Working on removable applications, not starting from the peel force alone. Starting on the buyer’s surface: dwell time, the handling path, and the question of what the package has to look like after the removal.Senior Application Engineer, Guanma Engineering Team
Removable vs Permanent vs Repositionable Labels
The imperfection due to an incorrect adhesive choice leads to two inverted issues: label coming unstuck too early or label ruining the package when taken off. It should be considered backwards: a starting point with the moment of removal in mind, not a group of adhesive types to consider.
Permanent adhesive
Expected bond behavior
Bond builds for long service life; removal is not the design goal.
Removable adhesive
Expected bond behavior
Holds during normal handling, then targets clean peel after a defined dwell time.
Repositionable adhesive
Expected bond behavior
Allows placement correction during application before final bond develops.
Bronze: test before scale-up
Performance Assurance Card
Guanma does not provide an unverified ROI percentage on removable label stock. The practical cost-control points are sample validation before commercial production, including surface fit, adhesive dwell, print method, liner release, roll width, and packaging stability.
Printing, Die-Cutting, and Release Liner Choices
Release liner choice impacts how a removable label stock cuts, strips, rewinds, and dispenses. Wilson Manufacturing reports that liner thickness, liner type, and impression depth may influence die-cutting behavior on pressure-sensitive materials.
Running rotary dies or high-speed dispensing?
Request a liner recommendation
Liner option
Available Guanma weights
Where it fits
Converter checkpoint
Glassine release liner
60 / 80 / 100 g/m2
Roll-to-roll conversion, automatic dispensing, general label production.
Confirm release force, die strike, liner stability, and matrix stripping.
CCK release liner
80 / 100 / 120 / 140 g/m2
Heavier facestocks, flatness-sensitive work, sheet or thick adhesive builds.
Confirm caliper, lay-flat behavior, and cut depth before production tooling.
Custom liner
On request
Special dispensing, film liner, or customer-specific converting conditions.
Send your equipment, core, unwind direction, and label size.
Paper path
Coated paper constructions support flexographic, offset, and UV printing for temporary retail and packaging labels.
BOPP path
Synthetic paper supports UV, flexo, screen, thermal transfer, and digital inkjet with the right coating.
PET path
PET film supports durable removable adhesive film work when dimensional stability is more important.
Sample Testing Workflow Before Mass Production
Removable adhesive performance should be approved through a controlled sample path. The goal is not only to make the label peel, but to keep removal predictable after storage, handling, and the intended application period.
01
Step 1 Share use conditions
- Package material and surface finish.
- Label size, shape, and dwell time.
- Temperature, moisture, oil, or handling exposure.
02
Step 2 Select material build
- Choose coated paper, BOPP synthetic paper, or PET film.
- Match removable adhesive and liner.
- Confirm roll width and print method.
03
Step 3 Test conversion
- Print, die-cut, strip matrix, and rewind sample rolls.
- Check release liner behavior on your equipment.
- Record edge lift, curl, or adhesive transfer.
04
Step 4 Approve scale-up
- Lock facestock, adhesive, liner, width, and packaging.
- Confirm repeat-order specification.
- Move to quote and production schedule.
Reduce wrong-material risk before the first full roll order.
Request removable adhesive sample kit
Certifications, Regional Supply, and Quality Control
Guanma integrates coating, laminating, R&D, and sales for self-adhesive label stock. Export support covers Southeast Asia, South America, and Europe, with Thailand and Vietnam facilities supporting regional supply and stable lead times.
Need documents for supplier approval?
Request compliance files
ISO 9001
Quality management certificate available.
RoHS
EU RoHS Directive test report available.
FSC
Paper-chain documentation available for relevant builds.
10+ years
Production and quality-control experience.
Factory control
Coating, lamination, and slitting parameters can be locked into a repeat-order specification.
R&D support
Custom removable adhesive development is available for high/low temperature, oil, weather, or durability demands.
Export packaging
Roll packaging and shipping terms are confirmed around buyer location, core size, and handling route.
Engineering Tools for Removable Labels Validation
Access our suite of interactive calculators and selectors. Determine the exact facestock, adhesive formulation, and liner configuration required before moving into commercial production runs.
Systems Online
Substrate Compatibility Checker
Analyze the behavior of removable adhesives across different surfaces including glass, PP/PE, PET, and coated cartons. Predict peel cleanliness based on exposure conditions and dwell time.
Label Stock Construction Selector
Build and compare custom material combinations. Align Guanma facestock, specialized removable adhesive, and release liner specifications to match your exact converting and printing pathway.
Removable vs Permanent Decision
Evaluate product lifecycle targets to establish a solid adhesive baseline. Navigate the critical crossover points between permanent, removable, and repositionable bonding requirements.
Buyer Questions for Clean-Peel Label Stock
These answers focus on buying and testing removable label stock, not finished office labels. Share your surface, print method, and removal target if you need a direct recommendation.
Database Record // 07 Entries
Smooth, high-energy surfaces like glass, PET, and smooth metal provide the most predictable clean-peel behavior. Low-energy plastics (PP/PE), textured surfaces, or heavily coated cartons require customized adhesive formulations to prevent premature edge lift or coating damage upon removal.
No. Repositionable labels are formulated with an extended “open time,” allowing placement correction during initial application before a permanent bond develops. Removable labels are designed to bond securely during the product’s entire lifecycle but peel off cleanly without residue after a defined dwell time.
Absolutely. Guanma integrates removable adhesive systems across our full facestock range. We offer coated paper for standard retail applications, BOPP synthetic paper for moisture/tear resistance, and PET film for high-durability and dimensionally stable requirements.
Clean removal is a strict performance target, but external variables matter. Extreme heat, prolonged dwell time, moisture, or UV exposure can increase adhesive flow and risk residue. We mandate testing the specific removable label construction on your actual substrate to guarantee zero residue under real-world conditions.
Glassine liner (60-100 g/m²) is the industry standard for high-speed roll-to-roll converting and automatic dispensing due to its excellent die-strike properties. CCK liner (80-140 g/m²) is recommended for heavier facestocks, sheeted applications, or whenever maximum lay-flat dimensional stability is required.
Yes. Our removable label constructions feature optimized top-coatings. Coated paper and synthetic films (BOPP/PET) are engineered to support flexographic, offset, UV, screen, thermal transfer ribbon (TTR), and digital inkjet printing pathways.
You can request a targeted sample kit by sharing your package material (e.g., Glass, PP, Carton), expected dwell time, printing method, and converting equipment details. Our engineering team will match the ideal facestock, adhesive, and liner combination for your trial run.
Trending now
