{"id":3437,"date":"2026-09-08T09:56:52","date_gmt":"2026-09-08T09:56:52","guid":{"rendered":"https:\/\/guanmalabel.com\/?p=3437"},"modified":"2026-09-08T09:56:52","modified_gmt":"2026-09-08T09:56:52","slug":"resistant-tag-material","status":"publish","type":"post","link":"https:\/\/guanmalabel.com\/vi\/blog\/resistant-tag-material\/","title":{"rendered":"V\u1eadt li\u1ec7u th\u1ebb kh\u00e1ng: 5 Ki\u1ec3m tra ph\u00ea duy\u1ec7t m\u1eabu"},"content":{"rendered":"
\n

A resistant tag material is only a starting point. To finalize a choice, define the exposure, attachment, printed image, finished-sample checks and purchasing controls. A tag can stay on the item while the barcode becomes unreadable; a sound-looking sheet can also leave the hole or fastener untested.<\/p>\n

This guide helps technical evaluators shortlist constructions and decide what evidence is still missing. It covers hanging tags first, with a separate route for adhesive labels. The examples are supplier-specific published data and clearly marked hypothetical buyer records. They aren’t Guanma test results or a universal durability ranking.<\/p>\n

Key takeaway<\/strong><\/p>\n

Approve the material, printed image and attachment as one finished construction. A material-family name or a test on a different specimen does not establish that your tag will pass.<\/p>\n<\/div>\n

Choose a hanging tag or an adhesive label first<\/h2>\n
\"Choose<\/figure>\n

Use a hanging tag when identification must be mechanically attached through a hole, slot, or loop rather than bonded to a surface. Use an adhesive label when a suitable surface is available and identification can be bonded to it. Each option introduces different considerations; therefore, the attachment option must be chosen prior to requesting a sample or comparing film thickness.<\/p>\n

For a hanging tag, the fixing point, tie and tag edge should be specified. For pressure-sensitive labels, the surface, adhesive, and the application should be considered. Textured castings, oily parts and clean flat panels are different bonding problems. Curved surfaces on industrial equipment also require a sample; a flat test panel doesn’t represent that surface. Hanging a tag may solve one bond problem and introduce an attachment problem.<\/p>\n

\n
Hanging tag<\/strong><\/p>\n